Drones are becoming a major part of society. A few years back, flying drones was just considered a hobby. Today, drones are being used in several different industries to cut costs and save time. This means that drones are only destined to become more efficient and effective. However, there are some problems that are quite common amongst drones, irrespective of the type. Therefore, we have compiled a list of those problems along with the solutions to help you find a way out in case your drone flying day is not going as planned. Let’s begin.
Common Drone Problems and Solutions
Screen’s Transmission Is Not Smooth
When it comes to the effects of screen transmissions, there are two common problems that need to be discussed, the receiving distance and interference problems. The former tends to occur more frequently.
Infact, effective image transmission is based on different brands of UAV and remote control signal receiving distance ranging from hundreds of meters to several kilometers. Therefore, when opting for a drone, you should consider and go through its effective range transmission.
If a drone is flown near to its critical point, the image transmission will not be smooth. At the same time, the user will also struggle with the remote control signals. The best way to solve this problem is to shorten the flying distance.
However, in the case of interference problems, the drone should not be flown where there are overhead cables or communication towers. These factors can easily disturb the signals received by the drone and will create disruptions during flight.
Blocked GPS Signals
The stability and accuracy of the drone depends on the number of signals it receives. If the drone reaches a point where the amount of signals is gradually dropping, the machine will struggle to follow the user’s commands. In some cases and areas, there is a GPS reception problem.
Areas that are heavily secured have signal jammers employed, which can easily bring the drone down. In addition to that, if the drone is being flown around or near walls or mountains, the chances of the signals being blocked are huge as well.
This is one of the most common drone problems faced by users. Drone remote control signals are not meant to pass through physical objects. This results in the users losing their drones as soon as they take them up in the air to capture some exhilarating shots.
You can easily solve this issue by choosing a location that does not include any kind of interference. If you observe that the drone is experiencing a signal problem when flown over a particular area, you should avoid going there as something might be interfering with the signals.
Abnormal Flight Direction
Before a drone is flown, there are some basic checks that need to be done. For instance, if your drone comes with a compass, it needs calibration. Sometimes, users tend to ignore this factor and soon observe their drone flying abnormally in the air.
Furthermore, it is important that the user checks the remote control settings too. Sometimes, it is the remote control that acts weird and creates all sorts of problems. Try restarting the remote or replacing the batteries. This is common amongst drone flying problems that can easily be fixed on your own.
However, if the compass is the culprit, you should consult a professional, who might be able to fix the issue.
UAV Signal Lost
Although drones have significantly improved over the years but the signal lost issue is still fairly common. While flying your drone, if you suddenly come across the signal lost issue, you should not panic. The majority of drones are equipped with a lost return mechanism, thanks to GPS navigation.
Even if the UAV does not return, the user should try approaching the UAV so that the distance is shortened and the drone is able to receive the signals. At the same time, the UAV instead of falling to the ground will hover in the air until it receives proper signals.
Then again, if that does not solve the issue, you can try restarting the remote control. This helps solve the issue in most cases.
Drone Battery Problems
Users often complain that their drones do not fly as much as stated by the manufacturer. This means that if a manufacturer claims that the flying time of its drone is 20 minutes, the user is not able to fly it beyond 10-15. This is important when it comes to using drones for photography and shooting videos.
One of the reasons contributing to this problem is that majority of drones come with Lipo batteries. The overall lifespan and usage time is shortened if we tend to overcharge them or discharge them before they are fully charged. At the same time, some users use aftermarket chargers instead of the official chargers that influence the flying time as well.
Experts advise that once the battery consumption has exceeded 80%, the drone should be put on charge. Draining the battery will reduce its lifespan. Therefore, if you have the chance, put the drone on charge as soon as the battery nears its end.
Drone Won’t Turn On
Perhaps one of the most frustrating drone broken problems is that it simply fails to turn on. The reason is that you might be looking at several problems that will require running a checklist. You know you have charged the batteries the day before and the drone was flying perfectly. How come, no problem all of a sudden?
One of the most common reasons why you can’t turn on the drone is that you are not aware of the process. Not every drone turns on the same way. Sometimes, you need to press the button, then press it again and hold it for a few seconds until it comes to life.
If you push the button once, the battery lights will light up indicating the battery charge. This will only show how much power is left but will not turn on the drone. If that drone still does not power up, you should check the battery connections.
Sometimes, dirt and dust buildup can irritate the brass connectors and hinder the performance of the batteries. Lastly, the batteries have become intelligent as well. They will not run if the temperature is below the recommended 32 F. You might want to try preheating them first.
Drone Won’t Take Off
If you observe that your drone does not take off, you might want to check the propellers for proper fitting. Propellers need to be installed in a particular way for the drone to take flight. If the case is otherwise, the drone will simply fail to take flight.
The reason is that the drone instead of taking a flight will be causing a push. This is a fairly common problem amongst drone users. Additionally, as mentioned previously, if the temperature outside is too cold, the drone will take a few minutes to warm up, so you need to be patient.
Alternatively, if it is too hot outside, the drone might be overheating and will not take off as a result.
Conclusion
Drones are surely exciting machines but some problems can take the fun of them. This is why it is important for you to be aware of such problems along with the solutions so that you are always one step ahead. And, make sure that you run a quick inspection before flying sessions to prevent any problems in the air.