Buying a laser engraver is a crucial decision for most businesses as this fantastic technology uses high powered lasers to engrave designs onto different surfaces. To perform engraving, the laser creates high heat that vaporizes the matter while exposing cavities that form a final image.
Laser engravers are mostly used in various industrial applications that require permanent marks for part identification and traceability. It uses the laser for marking the surface of the item. It works much like a 3D printer, where a computer sends the instructions and manages its operations.
Choosing the Right Engraver
According to HiSpeed Laser, Before buying a laser engraver, you need to consider the following things:
Before buying a laser engraver, you should decide what you need it for and set the objectives you’re trying to accomplish by purchasing an engraver. Once you’ve got that taken care of, you’ll have a clear view of what to get, depending on your need.
There are many laser engravers on the market, ranging from medium to high-end, so it’s better to check and be sure of your budget for buying the desired engraver. You should ascertain the cost of one and make sure it is the right one for your needs and whether you can afford it within your budget limit.
You should always ensure to consider the availability of replacement parts of the machine you’re looking to buy. If anything breaks down, you’re going toneed replacement parts because the truth is, any device that you buy might eventually break at some point. That is why it is essential to know whether the replacement parts of the laser engraver are readily available or not.
Accuracy of Engraver
The results of an engraver depend highly on its accuracy, whether it can produce the desired results you’re seeking. It would be best to test the laser engraver’s accuracy before buying it and how nicely it can achieve the desired tasks. Many things determine the accuracy of an engraver; here are some of the important ones:
There are two transmission methods of a laser engraver; one is called lead screw, and the other is called rack gear. There is a relationship between engraving accuracy and the screw drive method. Generally, the lead screw drive’s accuracy tends to be higher than rack gear, showing how accurate it can be.
Technique and Proficiency
The technique and proficiency that most technicians use in assembling the engraver are also essential aspects that help determine the laser engraver’s accuracy. The better and smoother it runs, the higher its precision would be.
Spindle power is also an important thing that helps determine the engraver’s accuracy as the higher the spindle power is, the higher accuracy it would have.
Square or Compass Engraving Machine
The engraving machine also helps determine the accuracy as the square engraving machines have higher accuracy than the compass engraving machines.
Easy to Use
Another essential thing to consider is the ease of using an engraver and how user-friendly it is. Most of the engravers come with instruction manuals that can help guide you in operating the machine and using it according to your needs.
Materials To Be Engraved On
Laser engravers are handy tools that help you in engraving a variety of materials. Before buying the laser engraver, you should think about the projects you will be working on and the materials you want to engrave. Some engravers are best at engraving certain types of materials, while others might not be useful to you. Therefore, before choosing one personal laser engraver over another, make sure it works on all the materials you want it for.
Before engraving, you should bear in mindnot to use the laser engraver on anything that can potentially damage the engraving material because certain things can react to the laser and be harmful to you. For example, if you cut PVC with a CO2 laser, it will create hydrochloric acid and toxic fumes, which are dangerous for you and may also damage the laser engraver itself.
Choosing the Right Size
Before buying a laser engraver, you should consider the needs of the project and the engraver’ssize that is suitable for the project. It would be better to make sure that the engraver you’re going to buy fits in your office space or workshop and is the right size that can handle your projects effectively.
If you are working on a large project, you will need a professional one, but if you are working on a small project, you will need either the HTL QT Desktop Laser Engraver or the CO2 laser engraver.
Maintenance is also an essential thing to consider when buying a laser engraver, as you need to know when it is required and whether you need to do it yourself or hire an expert. It is complicated to tell whether the device needs care or not, and it results in a lot of problems later on. If it is difficult to maintain, you’ll need to hire an expert technician to look at it. Hence you should look for a machine that is easy to maintain and repair.
Our Top Picks for Personal Laser Engraving Machines
ORTUR Laser Master 2 is a faster, more precise, and easy to use laser-engraver. It has a high 3000MM per min speed and supports a high baud rate of about 921,600. It has a specialized motherboard with a G-sensor and an STM32 MCU that can preprocess 32 instructions. The G-sensor on the motherboard helps the machine to stop if it detects any unauthorized movement.
Laser Pecker Pro engraver rocks a small and lightweight design. It can engrave on different materials like wood, fabric, paperboard, leather, felt, plastic, etc. It is a user-friendly personal engraving device that you can use to engrave, carve, cut, etch, etc. It also has an in-app editing mode that allows you to create different patterns or words and modify the picture for engraving if desired.
WAINLUX K4 is an excellent engraver that you can use for etching onto different materials like wood, bamboo, cardboard, plastic, leather, acrylic, etc. It offers an engraving range of 3.14 x 3.14” with no basic design, carving height, or material size limit. It has an engraving power of 3000mW with an accurate precision of 0.01mm, making it suitable for manufacturers, home DIY fans, and other artists.
LE-4040 is a desktop engraving machine that has an engraving power of 5000mW. It can engrave on different materials like plywood, acrylic, cardboard, leather, etc. Its main parts are pre-assembled, and it is easy to install, which makes it suitable for both beginners and professionals. It also provides a working area of 40 x 40 cm, capable of daily engraving tasks.
CNC Pro is a DIY Logo engraving machine that has an engraving power of 3000mW. It provides an engraving range of 17.5 to 15.5 cm. Although it cannot carve metal or glass, it is suitable for cutting other materials like IC cards, mobile phone cases, wood, bamboo, plastic, acrylic, etc. But before carving, you should ensure to doa black painting coating.
The CNC 3018 Pro by Titoe is a 2 in 1 engraving machine with an engraving power of 5500mW and a precision power of 0.1mm. It is an upgraded version of the CNC 3018 and is integrated with a driver chip, fixed heat sink, external fan, and sturdy casing that extends the control board’s life. It also has circuit protection that cannot be easily damaged. It can import pictures directly to module GRBL for engraving purposes.
Laser Engraver – An Artistic Tool
Before deciding on the kind of laser engraver you want to buy, it is essential to consider all the things we have mentioned above and discuss them with the seller you are purchasing the engraver from.
If you don’t find all the information or answers on the product page, go ahead and talk to the company’s representative and tell them what you plan to do with the engraver. They might provide you some good suggestions and allow you to get thebest laser engraver according to your requirements and budget.